info@tempcontrol.nl | +31 (0) 15 251 18 31

DA562 - Inor

DA562 Dual Channel Isolation Transmitter for mA/V Signals - Inor

Dual Channel Isolation Transmitter for mA/V Signals - Inor
 

DA562 is specially designed for signal isolation and load amplification in the process industry. Two independent and galvanically isolated channels allow for high-density mounting.
DA562 maintains a high isolation level (1,5 kV) between input, output and the two channels. Current and voltage can be chosen independently as input and output signals.

  • Two fully independent isolated channels
  • Current and voltage input
  • Current and voltage output
  • Output test terminals
  • 1 500 V isolation level
  • Short response time
  • High noise immunity
  • Available for AC or DC power supply
  • DIN-rail mounting
  • Plug-in screw terminals

Main features

  • No. of channels: Two, independent selection of input/output signal
  • Input voltage:  0(0,2)-1 V, 0(1)-5 V, 0(2)-10 V
  • Input impedance: 1 MΩ
  • Input current: 0(4)-20 mA (standard setting)
  • Input impedance: 11,9 Ω
  • Maximum input level: 200 % of measurement span
  • Output voltage: 0(0,2)-1 V, 0(1)-5 V, 0(2)-10 V, short circuit protected
  • Minimum load: 500 kΩ (error effect
  • Voltage limitation: Ca 56 V
  • Output Current: 0(4)-20 mA, open or short circuit protected (standard setting)
  • Maximum load: 600 Ω
  • Current limitation: Appr. 23 mA
  • Test output: mA instrument, Ri ≤ 10 Ω
  • Operation temperature: -20 to +60 °C / -4 to +140 °F
  • Galvanic isolation AC & DC version:
    • Input to output 1 500 VAC, 1 min
    • Input/output to power supply 2 200 VAC, 1 min
    • Between channels 1 500 VAC, 1 min
  • Power supply AC versions:
    • 230 VAC, -15..+10 %, 45..75 Hz,
    • 115 VAC, -15..+10 %, 45..75 Hz
  • Power supply DC version: 19 to 60 VDC
  • Typical accuracy: ±0.15 % of span
  • Connections: Plug-in terminals Stranded, ≤ 2.5 mm2, AWG 14
  • Mounting: Rail acc. to DIN EN 50022, 35 mm
  • Inor

Downloads

More information