DA561 transmitter – Inor

Isolation transmitter for mA/V signals with 2-wire transmitter supply – Inor
DA561 is specially designed for signal isolation and load amplification in the process industry.
A 2-wire transmitter can be connected to and supplied from the isolation amplifier. DA561 maintains a high isolation level (1,5 kV) between input and output. Current and voltage can be chosen independently as input and output signals.

Features

Current and voltage input
Current and voltage output
Direct connection of 2-wire transmitter
Output test terminals
1 500 V isolation level
Short response time
High noise immunity
Available for AC or DC power supply
DIN-rail mounting
Plug-in screw terminals

Properties

Input voltage: 0(0,2)-1 V, 0(1)-5 V, 0(2)-10 V
Input impedance: 1 MΩ
Input current: 0(4)-20 mA (standard setting)
Input impedance: 11,9 Ω
Maximum input level: 200 % of measurement span
Output voltage: 0(0,2)-1 V, 0(1)-5 V, 0(2)-10 V, short circuit protected
Minimum load: 500 kΩ (error effect)
Voltage limitation: Approx. 56 V
Output Current: 0(4)-20 mA, open or short circuit protected (standard setting)
Maximum load: 600 Ω
Current limitation: Approx. 23 mA
Test output: mA instrument, Ri ≤ 10 Ω
Transmitter supply voltage: 19 VDC, max. ripple 100 mV p-p
Operation temperature: -20 to +60 °C / -4 to +140 °F
Galvanic isolation AC & DC version:
- Input to output 1 500 VAC, 1 min
- Input/output to power supply 2 200 VAC, 1 min
Power supply AC versions:
- 230 VAC, -15..+10 %, 45..75 Hz,
- 115 VAC, -15..+10 %, 45..75 Hz
Power supply DC version: 19 to 60 VDC
Typical accuracy: ±0,15 % of span
Connections: Plug-in terminals Stranded, ≤ 2.5 mm2, AWG 14
Mounting: Rail acc. to DIN EN 50022, 35 mm